Motorcycle lift tables are an integral part of any motorcycle workshop. They provide a stable platform for tasks such as oil changes, tire and wheel work, cleaning, and repairs. But, with so many models available on the market, how do you choose the right one? This article will discuss the operation method and notes of the pneumatic motorcycle lift tables. We will cover topics such as safety, function, and maintenance of the lift table. This information is crucial for anyone who wants to get the most out of their lift table and keep it in tip-top condition. Read on to learn more!
Overview Of Pneumatic Motorcycle Lift Table
A pneumatic motorcycle lift table is a lifting device that uses compressed air as the power source. It has the advantages of simple structure, easy operation and maintenance, low noise, and no pollution.
The pneumatic motorcycle lift table is widely used in factories, warehouses, docks, and other places where goods need to be lifted or lowered. It can be used to lift motorcycles, scooters, ATVs, and other vehicles with a maximum weight of 250kg.
When using a pneumatic motorcycle lift table, always make sure that the lifting platform is level and stable before loading or unloading any vehicle. If the platform is not level, it could cause the vehicle to tip over when being lifted or lowered.
Always wear protective clothing when operating a pneumatic motorcycle lift table. loose clothing or jewelry could get caught in the moving parts of the lift and cause serious injury.
Operation Method Of Pneumatic Motorcycle Lift Table
(1)Before use, check whether the power supply and air source are normal, whether the lifting cylinder is damaged, whether the lifting chain is loose or broken, and whether the base is stable.
(2)Check whether the control switch is in the off position before operation.
(3)Connect the power supply and air source.
(4)Open the control valve slowly to make the lifting table rise evenly until it reaches the rated height (about 1m). At this time, stop inflating and close the control valve to prevent accidental injury due to overinflation. If someone needs to get on or off the motorcycle during inflation, he should first notify others and then operate slowly. After people get on or off safely, continue to inflate according to the previous method.
(5)When using a pneumatic motorcycle lift table for maintenance, pay attention to unplugging all power plugs first, so as to avoid electric shock accidents; when lowering, be sure to let the air out slowly to prevent falling off suddenly and hurting people; do not place any tools or materials on it that exceed its weight limit, so as not to cause personal injury or damage to equipment due to unexpected circumstances; always keep your hands away from moving parts during operation to avoid being caught and injured; regular maintenance can prolong its service life
Operation Notes Of Pneumatic Motorcycle Lift Table
When the pneumatic motorcycle lift table is in operation, first check whether the power supply and air source are turned on. Then check whether the lifting platform is level. If it is not level, adjust the leveling screws at the four corners of the lifting platform until it is level.
Then, open the air valve to start supplying air to the lift table. The air pressure gauge will indicate the air pressure in the lift table. When the lifting platform starts to rise, observe the rising trend of the lifting platform. If the lifting platform rises too fast or is not stable, immediately turn off the air valve to stop supplying air to the lift table.
After the lifting platform has risen to a certain height, it can be used for maintenance or other purposes. When finished, close the air valve to release all of the air from the lift table. Then lower the lifting platform by adjusting the leveling screws at the four corners of the lifting platform.
Related News